Hi Richard,
The aaa-new model command, once enabled always asks you for a
username/password combination for any login type. Looking at your config I
expect you to get a username/password prompt and failed logins for both con
and vty unless if authenticated by tacacs and am surprised you are
: Richard
To:
Sent: Thursday, November 29, 2001 12:20 AM
Subject: Cisco ACS/Telnet config [7:27648]
Looking at the config below, can anyone tell me where I might go wrong
that
prevent me from telneting to this router? I am able to use the same
account
from Cisco ACS 2.6 to log onto the console
28, 2001 10:46 PM
Subject: Re: Cisco ACS/Telnet config [7:27648]
Maybe add ip tac source e0; password in vty is not
necessary.
Run debug aaa authen and debug aaa author may help
too.
HTH.
Jim
--- Richard wrote:
Looking at the config below, can anyone tell me
where I might go
Looking at the config below, can anyone tell me where I might go wrong that
prevent me from telneting to this router? I am able to use the same account
from Cisco ACS 2.6 to log onto the console, but not through telnet.
Thanks in advance for your help
Current configuration:
!
version 12.0
Maybe add ip tac source e0; password in vty is not
necessary.
Run debug aaa authen and debug aaa author may help
too.
HTH.
Jim
--- Richard wrote:
Looking at the config below, can anyone tell me
where I might go wrong that
prevent me from telneting to this router? I am able
to use the
5 matches
Mail list logo
