I broke in to a Cisco 2600 router today, but I didn't have access to my
handy sheet that tells me exactly what config-register setting to type in.
Instead of 0x2142 I put 0x2124. Now when I hard bott the router it gives
me'JJJ^^' .
Now, I've never seen this be
Can you power cycle the router and hit your break sequence to get to
ROMMON and from there change the register with the confreg 0x2102
command??
Dave
Frank Lodato wrote:
>
> I broke in to a Cisco 2600 router today, but I didn't have access to my
> handy sheet that tells me exactly what config
NO, here are my symptoms,
Now, I can't:
-type commands after the "J's" finish appearing
-CTRL break does stop the J's, but nothing on the keyboard works properly
so I can't type in any commands
-hard boot gives the same results everytime.(J's) and that's it
-I haven't let the router sit for a wh
You've managed to set the router to netboot, and the console baud rate
to 19200.
Everything else is the same as the default 0x2102.
Set your baud rate to 19200, and after make sure there is no baud rate
in line con 0, get the config-register set right, and you can switch
back to 9600 baud.
Usef
mode and change
the config register to your desired setting.
HTH's
Mark
-Original Message-
From: Frank Lodato [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 01, 2002 10:10 AM
To: [EMAIL PROTECTED]
Subject: Config-register [7:54632]
I broke in to a Cisco 2600 router today, but I
> the config register to your desired setting.
>
> HTH's
> Mark
>
> -Original Message-
> From: Frank Lodato [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 01, 2002 10:10 AM
> To: [EMAIL PROTECTED]
> Subject: Config-register [7:54632]
>
> I broke in to a
nfig mode and change
> the config register to your desired setting.
>
> HTH's
> Mark
>
> -Original Message-
> From: Frank Lodato [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, October 01, 2002 10:10 AM
> To: [EMAIL PROTECTED]
> Subject: Config-register [7:5
Hi
I hope this would help you.
http://www.cisco.com/warp/public/701/59.html#console
good luck
jagan krishnaraj
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54687&t=54632
--
FAQ, list archives, and subscription info: http://
know that :)
Thanks for clearing that up. Don't I feel like a dolt.
Mark
-Original Message-
From: Shawn Heisey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 01, 2002 2:05 PM
To: Mark W. Odette II
Cc: [EMAIL PROTECTED]
Subject: Re: Config-register???? [7:54632]
Mark,
Act
al Message-
From: Frank Lodato [ mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 01, 2002 10:10 AM
To: [EMAIL PROTECTED]Subject: Config-register [7:54632]
I broke in to a Cisco 2600 router today, but I didn't have access to my
handy sheet that tel
10 matches
Mail list logo