Config [7:20759]

2001-09-21 Thread Wesley J
I need help w/ a little config info... RtrA (s0 192.1.1.4)& RtrB (s0 192.1.1.3) connected via serial cable. They can each ping each other. RtrB has a PC (ip address 192.168.1.1)connected to its' e0 int (192.168.1.10) through a hub. How can I ping from RtrA (s0 192.1.1.4)to the PC attached to Rtr

Re: Config [7:20759]

2001-09-22 Thread Syamalendu C
Message - From: "Wesley J" To: Sent: Saturday, September 22, 2001 11:55 AM Subject: Config [7:20759] > I need help w/ a little config info... RtrA (s0 192.1.1.4)& > RtrB (s0 192.1.1.3) connected via serial cable. They can each ping each > other. RtrB has a PC (ip addres

RE: Config [7:20759]

2001-09-22 Thread Paul Jin
You would need to configure a static route from RtrA towards the ethernet segment of RtrB. Something like ip route 192.168.1.0 255.255.255.0 192.168.1.1.3 configured on RtrA. What is happening is that RtrA does not know how to route packets to B's ethernet segment. The only route it knows abou

RE: Config [7:20759]

2001-09-22 Thread Wesley J
Hey Paul, I'm not getting any communication between s0(192.1.1.3) & e0 (192.168.1.10) on RtrB using an extended ping with e0 as the destination and s0 as the source. I entered "ip route 192.168.1.0 255.255.255.0 e0" and it doesn't show up in the route table. I entered "ip route 0.0.0.0 0.0.0.0 e0

RE: Config [7:20759]

2001-09-25 Thread Mark Morenz
Can router B ping the PC? From what you've said, (that there isn't a route there) I doubt it. Until B can ping it, A won't be able to... HTH :-{)] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21025&t=20759 -- FAQ, list archive

RE: Config [7:20759]

2001-09-25 Thread Wesley J
That's what I'm having a problem with. RtrB can ping the PC & RtrA can ping the RtrB e0 interface, but won't ping the PC. It was mentioned to make the default gateway on the PC the RtrB e0 address. I'll try that & see what happens... thanx to all your help. That was exactly the answer I needed. B