I have a 2916XL that is connected to a compaq server with two NC3130 NIC
cards and is configured for Cisco Etherchannel. I placed the two contigous
ports in a port group. When I look at the switch both interfaces are up, the
switch shows that they are both in group 1 but one port is in blocking
I know that some of the older compaq NIC's don't support it (we tried it
here and no dice)... so you might want to check your NIC's.
Cheers,
Jeff
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
The NICS I have support Etherchannel, IN fact they say they are configured
as a Etherchannel, but the switch does not seem to recognize the bundle as
STP blocks or disables one of the ports.
Lonnie
""Jeff Duchin"" [EMAIL PROTECTED] wrote in message
8qdg09$1bl$[EMAIL
I think that the Etherchannel configuration is working correctly. After
placing two ports in a port group, oneof the ports shows that STP is
"disabled" and the other shows that it is in a forwarding state. I believe
this is correct and that the switch only allows one of the ports in the
group to
You don't want the NIC's configured as trunked ports, or probably
EtherChannel for that matter as it used between switches. I would try and
configure them on the server.
Jeff
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
5 matches
Mail list logo
