nothing like a good solid answer...
Ken,
Cisco uses what is called an access-list (commonly ref'd to as ACL)to
allow/disallow traffic.
I'll give you a scenarios and you can apply it to your situation and then
you can tell me if it worked for you.
network 10.1.1.0 netmask 255.255.255.0
default
L PROTECTED]]
> Sent: Thursday, August 23, 2001 3:13 PM
> To: [EMAIL PROTECTED]
> Subject: How to open specific TCP & UDP ports... [7:17047]
>
>
> Hello,
>
> I am administering a Cisco 1600 router. I need to "open" a
> specific TCP &
> UDP port numb
Unless you have an access list, they are open.
Priscilla
At 04:13 PM 8/23/01, Ken Owens wrote:
>Hello,
>
>I am administering a Cisco 1600 router. I need to "open" a specific TCP &
>UDP port number to allow traffic for a specific application.
>
>I have read my documentation for this router prett
firewall onsite that may be blocking traffic?
Heather Buri
> -Original Message-
> From: Ken Owens [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, August 23, 2001 3:13 PM
> To: [EMAIL PROTECTED]
> Subject: How to open specific TCP & UDP ports... [7:17047]
&g
An access list will likely do this for you..
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Thu, 23 Aug 2001, Ken Owens wrote:
> Hello,
>
> I am administering a Cisco 1600 router. I need to "open" a specific TCP &
> UDP port number to allow traffic for a specific application.
>
>
Hello,
I am administering a Cisco 1600 router. I need to "open" a specific TCP &
UDP port number to allow traffic for a specific application.
I have read my documentation for this router pretty thoroughly and do not
see this mentioned anywhere. Does anyone have any advice for me on this
topic?
6 matches
Mail list logo
