Leonardo,
Try the following config:
permit udp any host x.x.x.x eq isakmp
permit esp any host x.x.x.x
K.T.
""Leonardo Borda"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know what are the ports to enable IPSEC traffic between two
> points when I have configured
You have to open IP protocols 50 and 51, and also udp port 500.
Josh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Juan Blanco
Sent: Tuesday, August 20, 2002 8:13 AM
To: [EMAIL PROTECTED]
Subject: RE: IPSEC Ports [7:51732]
Yes,
You need to make
Yes,
You need to make sure that port 50, 51 and udp 500 are open in the two
ends-points
JB
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Leonardo Borda
Sent: Tuesday, August 20, 2002 8:20 AM
To: [EMAIL PROTECTED]
Subject: IPSEC Ports [7:51732]
Does
Does anyone know what are the ports to enable IPSEC traffic between two
points when I have configured access-lists on the interfaces?
I am getting that problem and I have found just few documents about it.
I know that I have to permit IP, UDP and TCP. Is there other protocols to
permit?
Please a
4 matches
Mail list logo