With Multilayer Switching (MLS), how does the MLS Switch (MLS-SE) know that
the router (MLS-RP) has an access list? In other words, how does the switch
know that it should use a destination flow mask, a destination-source flow
mask, or a full-flow mask? The access list, afterall, is on the router,
: Saturday, March 29, 2003 7:10 PM
To: [EMAIL PROTECTED]
Subject: MLS and access lists [7:66464]
With Multilayer Switching (MLS), how does the MLS Switch (MLS-SE) know
that
the router (MLS-RP) has an access list? In other words, how does the
switch
know that it should use a destination flow mask, a
Hi Priscilla,
Your suspicion is 100% correct: the flow mask is signaled from the router
(RP) to the switch (SE) via the MLSP protocol.
Take care,
Kennedy
Priscilla Oppenheimer wrote:
>
> With Multilayer Switching (MLS), how does the MLS Switch
> (MLS-SE) know that the router (MLS-RP) has an a
it
and an MLS flow never get created for that L4 based connection.
Hope this helps.
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
Sent: 30 March 2003 00:10
To: [EMAIL PROTECTED]
Subject: MLS and access lists [7:66464]
With Multilayer Switching (MLS), how does
ng.
Priscilla
>
> Hope this helps.
>
> -Original Message-
> From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
> Sent: 30 March 2003 00:10
> To: [EMAIL PROTECTED]
> Subject: MLS and access lists [7:66464]
>
>
> With Multilayer Switching (MLS), how does
: Saturday, March 29, 2003 7:10 PM
To: [EMAIL PROTECTED]
Subject: MLS and access lists [7:66464]
With Multilayer Switching (MLS), how does the MLS Switch (MLS-SE) know
that
the router (MLS-RP) has an access list? In other words, how does the
switch
know that it should use a destination flow mask, a
6 matches
Mail list logo
