I know I've read this somewhere, but the only examples I can
find on CCO are with async and ISDN. I currently have a
saturated T1 using PPP connecting 2 of my sites. Is it possible
to bundle a second one using MPPP to increase my bandwidth?
Thanx in advance.
Ed
_
Yes it is possible. We currently have a site that is connected via 2 t-1's
in a multilink ppp bundle. They share the single ip address on the virutual
interface and the actual t-1's don't have an address.
Regards,
Aaron K Dixon
"Ed" <[EMAIL PROTECTED]> wrote in message
8g1qi2$89f$[EMAIL PROTE
Can you post the relevant sections of the config? Also if you could
email it to me @ [EMAIL PROTECTED] I would appreciate it. Thanks
Kenny
"Aaron K. Dixon" <[EMAIL PROTECTED]> wrote in message
8g1sh4$ch1$[EMAIL PROTECTED]">news:8g1sh4$ch1$[EMAIL PROTECTED]...
> Yes it is possible. We cur
I found this on CCO after I read Aaron's reply.
!
interface Multilink1
ip unnumbered Ethernet1
ip route-cache policy
ip policy route-map bundle
no shutdown
no cdp enable
ppp chap hostname group1
ppp multilink
multilink-group 1
!
interface Ethernet1
ip address 192.13.1.1 255.255.255.0
i
Here is the relevant portion of the configuration.
interface Serial9/6
description
no ip address
no ip directed-broadcast
encapsulation ppp
no fair-queue
ppp multilink
!
interface Serial9/7
description
no ip address
no ip directed-broadcast
encapsulation ppp
no fair-queue
ppp multil
I don't see where the 2 serial interfaces are defined to be a
part of the virtual-template. Would it be possible to do this
using a multilink-group as I have posted above??
Thanx in advance.
Ed
""Aaron K. Dixon"" <[EMAIL PROTECTED]> wrote in message
8g4gts$llu$[EMAIL PROTECTED]">news:8g4gts$ll
Check this link out.
http://www.cisco.com/warp/public/131/7.html
Scott
-Original Message-
From: Ed [mailto:[EMAIL PROTECTED]]
Sent: Saturday, May 20, 2000 11:02 AM
To: [EMAIL PROTECTED]
Subject: Re: MPPP with 2 T1's
I don't see where the 2 serial interfaces are defined to
ailto:[EMAIL PROTECTED]]
> Sent: Saturday, May 20, 2000 11:02 AM
> To: [EMAIL PROTECTED]
> Subject: Re: MPPP with 2 T1's
>
>
>
> I don't see where the 2 serial interfaces are defined to be a
> part of the virtual-template. Would it be possible to do this
> u
8 matches
Mail list logo