Always harcode L2 speeds with mac, especially on the switch and server.
Martijn
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens Dwayne
Saunders
Verzonden: woensdag 11 december 2002 17:32
Aan: [EMAIL PROTECTED]
Onderwerp: Mac network [7:58945]
Hi all
I have worked on Cisco, Cabletron and Nortel switches and I had to come with
different solutions with.
I think the switch ports are set to Auto Neg. ON. Try port setting to 100
Half for G4s and 10 half for G3s and see what happens.
Sayeed
Dwayne Saunders wrote in message
[EMAIL
If you're talking about a $100 switch (like a NetGear or LinkSys) can you
even set any of the port parameters on that switch? No cheapy NetGear I've
seen allows you to do that.
If you hook up a Win2K/Linux/etc to this network do you have these same
problems?
Quoting John Smith :
I have worked
by it.
***
-Original Message-
From: Mark Smith [mailto:[EMAIL PROTECTED]]
Sent: Friday, 13 December 2002 2:16 AM
To: [EMAIL PROTECTED]
Subject: Re: Mac network [7:58945]
If you're talking about a $100 switch (like a NetGear or LinkSys) can you
even set any of the port parameters on that switch? No cheapy
by it.
***
-Original Message-
From: Mark Smith [mailto:[EMAIL PROTECTED]]
Sent: Friday, 13 December 2002 2:16 AM
To: [EMAIL PROTECTED]
Subject: Re: Mac network [7:58945]
If you're talking about a $100 switch (like a NetGear or LinkSys) can you
even set any of the port parameters on that switch
Hi all Mac users
I have a small problem with a network that I was asked to look at
there is 6 end user machines and 1 server all connected via a switch the
problem is that when connected to the switch network transfers to and from
the server are very slow i.e. 100meg file take approx 18
autonegotiate on the switch.
Dave
Dwayne Saunders wrote:
Hi all Mac users
I have a small problem with a network that I was asked to look at
there is 6 end user machines and 1 server all connected via a switch the
problem is that when connected to the switch network transfers to
?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dwayne Saunders
Sent: Wednesday, December 11, 2002 10:32 AM
To: [EMAIL PROTECTED]
Subject: Mac network [7:58945]
Hi all Mac users
I have a small problem with a network that I was asked to look at
there is 6 end
Dwayne,
If you can check the network couters on your MAC - look for FCS error.
If you have any, then this is a classic duplex mismatch. Second thing you
can do is transfer a file to and from the workstation. I use FTP
and issue a get and then a put. Comparing the results will reveal a
mismatch
Dwayne Saunders wrote:
Hi all Mac users
I have a small problem with a network that I was asked to look
at
there is 6 end user machines and 1 server
What kind of server? If it's a Windows server, check out this terrific site
for cross-platform networks.
http://www.macwindows.com/
10 matches
Mail list logo