Hi,
On a 3640 router, I have put an NM 2V with 2 VIC FXS cards.
These voice cards give a problem when they're BOTH in the module in that the
router freezes or the voice card doesn't disconnect.
Independently they work beautifully.
Any thoughts on this?
TIA
Sujal
Message Posted at:
http:/
Hi,
Plug your modules, IOS, etc into the 2600/3600 memory
calc tool and see if you have enough memory to support
the modules.
http://www.cisco.com/cgi-bin/Support/MemCalc/mem-calc.pl
--- "Sujal G. Ajmera"
wrote:
> Hi,
>
> On a 3640 router, I have put an NM 2V with 2 VIC FXS
> cards.
>
> Thes
I have the required memory - 64mb and the cards were working alright for
about 3 months or so.
This problem is since 2 weeks only.
Thanks,
Sujal
- Original Message -
From: Erick B.
To:
Sent: Friday, January 25, 2002 12:47 PM
Subject: Re: NM 2V [7:33166]
> Hi,
>
> Plug you
64mb and the cards were
> working alright for
> about 3 months or so.
>
> This problem is since 2 weeks only.
>
> Thanks,
>
> Sujal
> - Original Message -
> From: Erick B.
> To:
> Sent: Friday, January 25, 2002 12:47 PM
> Subject: Re: NM 2V [7:33166]
No, Eric, it doesn't reboot.
In fact, I have put the NM 2V on my 3660 router also and same problem
occurs!
Thanks,
Sujal
- Original Message -
From: Erick B.
To:
Sent: Friday, January 25, 2002 1:38 PM
Subject: Re: NM 2V [7:33166]
> When the problem occurs, does the route
Sujal,
just to be on the safe side, here are the IOS versions that you need to
support your NM2V and your voice cards. Check if you run the right version:
3600
NM-2V=
11.3(1)T, 12.0(1)T, 12.0(1),
12.0(2)T, 12.0(2)XC, 12.0(2)XD,
12.0(3)T, 12.0(5)XK, 12.0(7)T,
12.0(7)XK, 12.1(1)T, 12.1(1),
6 matches
Mail list logo