Of course, if you're in the UK, you are (I think) probably using ETSI ISDN,
so the physical config would actually be something like...
controller E1 0
clock source line primary
pri-group timeslots 1-31
interface Serial0:15
isdn switch-type primary-net5
! rest of interface config...
That's
Hi
I'm slowly getting my teeth into the world of cisco - but I am struggling to
set up the following.
I have two Cisco 2611XM routers, each with a serial card and a PRI card.
I have set up the serial interfaces with a 30 bit IP address range, and the
2Mb serial link works well. I would now like
hello
r u using a PRI E1 or T1
If PRI E1
configure the serial n:15
ip address
line code hdb3
framing CRC-4
no shut
configure
this as the backup link for ur serial
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74439t=74433
Robert Bentley wrote:
Hi
I'm slowly getting my teeth into the world of cisco - but I am struggling to
set up the following.
I have two Cisco 2611XM routers, each with a serial card and a PRI card.
I have set up the serial interfaces with a 30 bit IP address range, and the
2Mb serial link works
4 matches
Mail list logo
