I have an issue that took me almost a month and still not figure out what's
the problem?
I can ping out to a connected router (fastethernet or any type of interfaces)
and can only ping the local interface.
For example, if I connect this router FastEthernet F3/0 to another router
FastEthernet 4/0.
Encapsulation failed appears because of arp failing. Try debug arp and
please could you paste show int f3/0 instead of show ip int fa3/0 ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66478&t=66472
--
FAQ, list archives
I wonder about the encapsulation type for the interface?
JB
Xy Hien Le wrote:
>
> I have an issue that took me almost a month and still not
> figure out what's
> the problem?
>
> I can ping out to a connected router (fastethernet or any type
> of interfaces)
> and can only ping the local inter
Xy Hien Le wrote:
> 00:28:14: IP: s=1.1.1.2 (local), d=1.1.1.1 (FastEthernet3/0), len 100,
> encapsulation failed
Might this be the problem:
http://www.cisco.com/warp/public/63/ping_traceroute.html#addres_pro
What does a 'show ip arp 1.1.1.1' show on the box that has IP address
1.1.1.2 (and vi
Encapsulation by default is ARPA.
Can this be changed?
JB
J B wrote:
>
> I wonder about the encapsulation type for the interface?
>
> JB
>
>
> Xy Hien Le wrote:
> >
> > I have an issue that took me almost a month and still not
> > figure out what's
> > the problem?
> >
> > I can ping out to a
J B wrote:
> Encapsulation by default is ARPA.
> Can this be changed?
Yes, it can (try 'encap ?' in interface config mode), but you don't need
to fiddle with that if you don't *know* you do.
Regards,
Marco.
Message Posted at:
http://www.groupstudy.co
]
Subject: Ping fail at all interfaces! [7:66472]
I have an issue that took me almost a month and still not figure out
what's the problem?
I can ping out to a connected router (fastethernet or any type of
interfaces) and can only ping the local interface. For example, if I
connect this r
try to change it to full-duplex.:)
""Xy Hien Le"" wrote in message
news:[EMAIL PROTECTED]
> I have an issue that took me almost a month and still not figure out
what's
> the problem?
>
> I can ping out to a connected router (fastethernet or any type of
interfaces)
> and can only ping the local
You can change Ethernet encapsulation if you're using VLANs, i.e. to ISL or
801.1q. You can also change encapsulation if you're using Novell NetWare,
since Novell supports 4 different encpsulations.
But with IP, you can't change the encapsulation. IP is essentially always
Ethernet II, although a r
To me everything seems well configured plus Xy says he has been
troubleshooting for one month now.
I would suggest that you upgrade the IOS on this particular router.
Also, does it happens the same if you ping from the other router ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/re
)
Thank you all
xy
- Original Message -
From: "richard dumoulin"
To:
Sent: Sunday, March 30, 2003 10:43 AM
Subject: Re: Ping fail at all interfaces! [7:66472]
> To me everything seems well configured plus Xy says he has been
> troubleshooting for one month now.
> I
PROTECTED]
Subject: Re: Ping fail at all interfaces! [7:66472]
I have swapped the FastEthernet modules of both routers and still NO
WORK
If I remove the FastEthernet from the TROUBLED router and install it in
another identical model router with identical IOS and both worked just
fine Could be
Xy,
The same problem happened to my 3662 last NOV. It drove me crasy. Then I
tried to replace the SDRAM and found out I got a bad SDRAM.
Let try and I hope it helps.
Good luck,
Tu Do
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66532&t=66472
---
13 matches
Mail list logo