Hi guys,
Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
Console> (enable) set trunk 3/1 on dot1q 1
Feature not supported on Module 3.
Is that due to IOS???if yes ,please advice required IOS for this module.
Thanks.
Console> (enable) sh ver
WS-C5505 Software, Version McpS
Type in "show port cap" to see if that port is even capable of either ISL or
dot1q. You'll probably find that it's not.
HTH,
John
On Sat, 1 Sep 2001 04:48:29 -0400, Cisco Lover wrote:
| Hi guys,
|
| Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
| Console> (enable)
ohn Neiberger
> Sent: Saturday, September 01, 2001 9:22 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Please Advice:Trunking problem [7:18170]
>
>
> Type in "show port cap" to see if that port is even capable of
> either ISL or
> dot1q. You'll probably find that
You need the 5224-R for trunking support
Dave
Cisco Lover wrote:
> Hi guys,
>
> Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
> Console> (enable) set trunk 3/1 on dot1q 1
> Feature not supported on Module 3.
>
> Is that due to IOS???if yes ,please advice required IOS fo
PROTECTED]
> Subject: Re: Please Advice:Trunking problem [7:18170]
>
>
> You need the 5224-R for trunking support
>
> Dave
>
> Cisco Lover wrote:
>
> > Hi guys,
> >
> > Trying to run ISL/DOt1Q trunking on my cat5,but getting this error.
> > Cons
it does trunking...
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > MADMAN
> > Sent: Saturday, September 01, 2001 4:33 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Please Advice:Trunking problem [7:1817
PROTECTED]]On Behalf Of
Leigh Anne Chisholm
Sent: Saturday, September 01, 2001 1:58 PM
To: [EMAIL PROTECTED]
Subject: RE: Please Advice:Trunking problem [7:18170]
Is there a 5224R? I can't find one on Cisco's site. I did however find a
WS-X5225R and it does trunking...
> -Origi
,
>CC: "Leigh Anne Chisholm" ,
>Subject: RE: Please Advice:Trunking problem [7:18170]
>Date: Sat, 1 Sep 2001 14:35:12 -1000
>
>It's probably a limitation of the module...some older modules do trunk but
>will only encapsulate with isl. There's a matrix buri
t;To: ,
>CC: "Leigh Anne Chisholm" ,
>Subject: RE: Please Advice:Trunking problem [7:18170]
>Date: Sat, 1 Sep 2001 14:35:12 -1000
>
>It's probably a limitation of the module...some older modules do trunk but
>will only encapsulate with isl. There's a matrix buried s
f
>
>
>
>
> >From: "Frank B"
> >Reply-To: "Frank B"
> >To: ,
> >CC: "Leigh Anne Chisholm" ,
> >Subject: RE: Please Advice:Trunking problem [7:18170]
> >Date: Sat, 1 Sep 2001 14:35:12 -1000
> >
> >It's pr
I looked at all the suggestions, but the common practice I followed is
while setting up a new GE or FE trunk for ISL/dot1q, you have to manually
clear the vlans from the trunk and add manually the one you want to select
or the same range, after that you should not have that error message,
the co
> Is there a 5224R? I can't find one on Cisco's site. I did
however find
> a
> WS-X5225R and it does trunking...
Well sort of... There is a WS-X5224 module. It does hardly
anything. It will not do any type of trunking (ISL or 802.1Q),
it will not do FEC, and it is not MLS capable. In shor
12 matches
Mail list logo