Has the telco tried all zeros loops to both ends, to verify b8zs/esf setup??
Brian
- Original Message -
From: "David Eitel" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, March 20, 2001 8:02 AM
Subject: Point to Point Link Problem
I ha
I have a point to point T1 that is not working. The routers involved are a
3640 and a 2610. I have configured the routers with the same line code,
framing, etc. The WICs are internal. The telco can loopup to the 2610 but
not the 3640. I've swapped cables and the internal WIC on the 3640 side. Any
PROTECTED]]
Sent: Tuesday, March 20, 2001 3:43 PM
To: Brian; David Eitel; [EMAIL PROTECTED]
Subject: Re: Point to Point Link Problem
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1915.htm
Check your cable one more time, and make sure it's a straight-through cable
to
the telco demarc (
AIL PROTECTED]
Sent: Tuesday, March 20, 2001 8:02 AM
Subject: Point to Point Link Problem
I have a point to point T1 that is not working. The routers involved are
a
3640 and a 2610. I have configured the routers with the same line code,
framing, etc. The WICs are internal. The telco ca
4 matches
Mail list logo