Hi Gary,
if you do a show interface eth 0
is there errors on the interface ?
When you have up up on the interface and no communication it is often a
cable mismatch, but if you did the test with an other router ...
Have you check the leds on the transiver are they the same with all routers
?
Bes
Place your switch SC0 or VLAN1 management address on the same subnet as
the directly connected 2501 and make sure the 2501 is plugged into a
default VLAN1 port.
If you cannot ping the directly connected switch (using a patch cable,
with no routing protocol enabled, no personal firewall to screw u
2 matches
Mail list logo