Hi Johan,
Not all network modules work for both the 36x and 26x. I thought the same
thing, but I have found a few modules that don't work for both.
Scott
-Original Message-
From: Johan Hjalmarsson [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 10, 2001 10:59 AM
To: [EMAIL PROTECTED]
: [EMAIL PROTECTED]
Subject: RE: C2620 with NM-1FE1R2W? [7:28716]
Hi Johan,
Not all network modules work for both the 36x and 26x. I thought the same
thing, but I have found a few modules that don't work for both.
Scott
-Original Message-
From: Johan Hjalmarsson [mailto:[EMAIL PROT
The 26xx is only capable of supporting 2 FE ports, and then only if they are
mainboard-based. Therefore, the NM-1FExxx and NM-2FExxx boards will not
work in them.
- Original Message -
From: "Johan Hjalmarsson"
To:
Sent: Monday, December 10, 2001 13:58
Subject: C2620 with NM-1FE1R2W? [
Here is a marketing blurb that appears to say it is supported on the
2600 platform but me thinks it lies ;)
http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm
Dave
Johan Hjalmarsson wrote:
>
> Does a NM-1FE1R2W= work in a Cisco 2620 router?
>
> I thought all NM's worked in
The blurb actually states it is not compatible with the 2600. Check the NM
table towards the bottom of the link.
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 10, 2001 1:57 PM
To: [EMAIL PROTECTED]
Subject: Re: C2620 with NM-1FE1R2W? [7:28716]
Here
tems Administration
TeraGlobal Communications
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jim Brown
Sent: Monday, December 10, 2001 1:15 PM
To: [EMAIL PROTECTED]
Subject: RE: C2620 with NM-1FE1R2W? [7:28716]
The blurb actually states it is not compatible with
ut the bad news,
ccie1ab
-Original Message-
From: Feargal Ledwidge [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 10, 2001 5:00 PM
To: [EMAIL PROTECTED]
Subject: RE: C2620 with NM-1FE1R2W? [7:28716]
Theres a good croos-referencing tool at:
http://www.cisco.com/cgi-bin/front
7 matches
Mail list logo
