Rather than a OS issue maybe there is a config issue?
Try a "show port channel 1" to see the Sup config
You might want to "set port channel 1/1-2 off"
> -Original Message-
> From: John McCartney [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, April 18, 2002 8:47 AM
> To: [EMAIL PROTECTED]
>
"You might want to "set port channel 1/1-2 off""
I already tried that, I even did a dis-able and that stopped the errors all
together. Thanks for the help though.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41851&t=41822
--
FA
I had a 2926T (Cat 5002, with Sup II engine) do the same thing. I was
running a similar version of 4.5(6a). I disabled the ports too, but it would
keep happenening when I plugged in a device to the port.
cleared config, no change either. reset module, no help.
BUT, I flashed 4.5(13) on it and it f
Jason, Thanks for your help, I'll try that. BTW - could you flash the SUP II
w/ the error msgs happening? Thanks again. - John
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41882&t=41822
--
FAQ, list archives, and subscription in
Jason, - Thanks it worked with 4.5(13a)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41886&t=41822
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure v
5 matches
Mail list logo
