DB-9
1- RX-
2- Ground
3- +5 Volt fused
4- Ground
5- TX-
6- RX+
7- Ground
8- Ground
9- TX+
RJ45
1- Ground
2- Ground
3- TX
4- RX
5- TX
6- RX
7- Ground
8- Not used
Hope this helps
-Original Message-
From: NetEng [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 10, 2001 11:35 AM
To: [EMAIL
also the RJ45 Cable is a reverse cross over pin 1 goes to pin 8, pin 2 goes
to
pin 7, 3 goes to 6, 4 to 5, 5 to 4, 6 to 3, 7 to 2, 8 to 1.
"Garrison, Cyndi D." 04/10/01 09:37AM
DB-9
1- RX-
2- Ground
3- +5 Volt fused
4- Ground
5- TX-
6- RX+
7- Ground
8- Ground
9- TX+
RJ45
1- Ground
2-
At 11:34 AM 4/10/01 -0400, you wrote:
Can anyone tell me where I can find the pinout info on creating a DB9
(female) to RJ-45 (male) cable for T/R? Thanks.
Console jack pin layout
http://www.cisco.com/univercd/cc/td/doc/product/fhubs/bmmicg/bmmconn.htm
It is an issue of mapping a PC's serial
numerous
times).
-e-
- Original Message -
From: "Carroll Kong"
To:
Sent: Tuesday, April 10, 2001 10:18 AM
Subject: Re: Cable Pinout [7:60]
At 11:34 AM 4/10/01 -0400, you wrote:
Can anyone tell me where I can find the pinout info on creating a DB9
(female) to RJ-45 (male) cab
4 matches
Mail list logo