From what I can see, you've initiated NAT, but didn't define a NAT Pool
of addresses. So, I can only deduce that the PIX is defaulting to PAT
operation rather than just not allowing traffic across the PIX at all.
(wasn't that nice of Cisco :-] )
I'm just starting to study the ins/outs of PIX,
Theoretically yes.
But the ip is reserved and nearly ever changes..
From: Jake
Reply-To: Jake
To: [EMAIL PROTECTED]
Subject: Re: Can get it to work (Pix 515 behind cable modem [7:49744]
Date: Fri, 26 Jul 2002 15:44:35 GMT
Is the outside interface doing DHCP from the ISP with the setroute
Kevin- Disregard my last post... I read your message wayyy to quickly,
and interpreted it to be asking why you were getting PAT results rather
than NAT as expected.
In reflection, I realize what you are actually asking, and also realize
that the configuration is missing Access Lists or Conduits.
access-group acl_inside in interface inside
Craig
At 03:49 PM 7/26/2002 +, you wrote:
hi Kim,
Thanks for your advice, ill try it..
-Kevin
From: Kim Graham
To: Kevin O'Gilvie ,
Subject: Re: Can get it to work (Pix 515 behind cable modem) [7:49744]
Date: Fri, 26 Jul 2002 7:34:51 -0400
Thanks
Ill let u know what the outcome is..
From: Craig Columbus
To: Kevin O'Gilvie
CC: [EMAIL PROTECTED]
Subject: Re: Can get it to work (Pix 515 behind cable modem [7:49744]
Date: Fri, 26 Jul 2002 12:09:50 -0400
Kevin,
Kim's right... If you've posted your entire config, then you've
change the outside interface to auto, create dhcpd address pool and enable
dhcpd pool inside.
int e0 auto
dhcpd enable inside
dhcpd address 192.168.0.1-192.168.0.15 inside
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49803t=49744
Thanks Peter,
Ill try that..
From: Peter zhang
Reply-To: Peter zhang
To: [EMAIL PROTECTED]
Subject: RE: Can get it to work (Pix 515 behind cable modem) [7:49744]
Date: Fri, 26 Jul 2002 17:56:38 GMT
change the outside interface to auto, create dhcpd address pool and enable
dhcpd pool inside
I cant change any configurations on the Modem.
Its a Motorola Surfboard usXXX
optimum online set it up.
Do u know how I can go about getting into that modem to check the configs?
From: Mike Sweeney
Reply-To: Mike Sweeney
To: [EMAIL PROTECTED]
Subject: RE: Can get it to work (Pix 515 behind
Is the outside interface doing DHCP from the ISP with the setroute command.
If so, this would mean that your global ip on your outside interface
changes. Am I correct to assume this??
Kevin O'Gilvie wrote in message
news:[EMAIL PROTECTED]...
Dear All,
Below is my config.
Can someone tell me
I am new to the pix so please verify these entries before you try them
(older version of pix) you need to add conduit statements. This version of
PIX (6.2(2)) may be able to use access lists so check on that prior to
putting in the conduits. Once you have entered the conduit statements clear
10 matches
Mail list logo