Hai Nick,
For the interface of the router you want to set as DCE add clockrate
56000(whatever) to the interface. Then that interface will be taken as DCE.
You can verify whether it has become DCE by issuing show controllers
command.
Bye
Syam
- Original Message -
From: "Nick Christofi"
To
There is DTE/DCE on both the physical level and the Frame-Relay level. So
configure the link with a clock speed on the end that has the DCE end of the
cable. Then configure the frame relay command as you have given below. The
layer two DCE end does not have to be the layer one DCE end. Experiment
If you skip the Frame Relay encapsulation and use HDLC instead, all you got
to do is provide the clock at the one acting as DCE:
router-dce(config-if)#clock rate 64000
If you want to simulate a Frame Relay, you will need a third switch. One to
act as a Frame Relay switch, and two to conn
3 matches
Mail list logo