ip default-gateway works if ip routing is disabled and
the router is basically a host on the network like
your PCs, etc. You would turn IP routing off (no ip
routing) to bridge all traffic for example.
Using ip default-network would let you propagate a
route via IGRP/EIGRP or RIP to a neighbor
I think what you really wanted to do was use "Ip default-network"
here is a link that will explain it to you further and what the difference
is. It has to do with weather you have ip routing enabled on your system.
Karl
http://www.cisco.com/warp/public/105/default.html
-Original
I think that you are saying that the PCs on router B's LAN can't reach the
Internet. Router B should have a default route to router A. ip route 0.0.0.0
0.0.0.0 (address of Router A serial port) or
ip route 0.0.0.0 0.0.0.0 serial 0 (use the number of the serial port on
router B. I'm assuming that
Just use ip route 0.0.0.0 0.0.0.0 10.100.67.254
to set your default route. IP default-gateway should only
be used if ip routing is disabled on the router.
Roman
At 06:36 PM 11/13/00 -0700, you wrote:
I have a problem getting the "ip default-gateway" to work on my router.
Please review the
4 matches
Mail list logo
