Line card in slot 6 is bad, replace it..the error is related to a
Hardware failure on the board...
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, June 26, 2003 12:07 PM
To: [EMAIL PROTEC
You have a BAD ASIC on your module. RMA baby! What kind of module is
it? I have seen many issues with the 6348 blades as ASIC's failing. With the
6348 mod, ASIC's come in 12 port clusters per ASIC.. when the ASIC's fail to
process, you get Coil errors.. You can either, move your connections to
1. %SYS-3-SYS_LCPERR3:Module [dec]: Bus Asic #[dec] out of sync error
This message indicates a multiple-synchronization problem between the
bus ASIC and the port ASIC. The first [dec] is the module number. The
second [dec] is the ASIC number.
Recommended Action: Replace the module if the error
Mario,
Found this through the Cisco Output Interpreter:
%SYS-3-SYS_LCPERR3 (x0):Module [dec]: Coil Pb Tx Underflow Error - Port #dec]
Explanation: This message indicates an underflow in the port ASIC transmit
buffer. The first [dec] is the module number. The second [dec] is the ASIC
port
numbe
wrote in message...
> Having a problem with 12 ports on one of our 6509's.. They are unable to
> pass traffic, and I get the following errors on the console.
>
> 2003 Jun 26 10:55:57 %SYS-3-SYS_LCPERR3:Module 6: Coil Pb Tx Underflow
> Error - Port #2:
I'm surpised at all the poor responses to this
Hey that's a good trick to throw in the Bag. I havn't had this problem
happen yet. the only problem I have had from the 6509's is a Belly up sup mod.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71502&t=71468
--
FAQ, list archiv
2003 11:36 PM
To: [EMAIL PROTECTED]
Subject: Re: Issue with 6509 [7:71468]
Hey that's a good trick to throw in the Bag. I havn't had this problem
happen yet. the only problem I have had from the 6509's is a Belly up sup
mod.
Message Posted at:
http://www.groupstu
Explanation This message indicates an underflow in the port ASIC transmit
buffer. The first [dec] is the module number. The second [dec] is the ASIC
port number.
Action If the error is limited to a single module, replace the module. If
the error occurs several times, contact your technical suppo
8 matches
Mail list logo
