Re: NM 2V [7:33166]

2002-01-25 Thread Sujal G. Ajmera
No, Eric, it doesn't reboot. In fact, I have put the NM 2V on my 3660 router also and same problem occurs! Thanks, Sujal - Original Message - From: Erick B. To: Sent: Friday, January 25, 2002 1:38 PM Subject: Re: NM 2V [7:33166] When the problem occurs, does the router reboot

RE: NM 2V [7:33166]

2002-01-25 Thread Georg Pauwen
Sujal, just to be on the safe side, here are the IOS versions that you need to support your NM2V and your voice cards. Check if you run the right version: 3600 NM-2V= 11.3(1)T, 12.0(1)T, 12.0(1), 12.0(2)T, 12.0(2)XC, 12.0(2)XD, 12.0(3)T, 12.0(5)XK, 12.0(7)T, 12.0(7)XK, 12.1(1)T, 12.1(1),

Re: NM 2V [7:33166]

2002-01-24 Thread Erick B.
Hi, Plug your modules, IOS, etc into the 2600/3600 memory calc tool and see if you have enough memory to support the modules. http://www.cisco.com/cgi-bin/Support/MemCalc/mem-calc.pl --- Sujal G. Ajmera wrote: Hi, On a 3640 router, I have put an NM 2V with 2 VIC FXS cards. These voice

Re: NM 2V [7:33166]

2002-01-24 Thread Sujal G. Ajmera
I have the required memory - 64mb and the cards were working alright for about 3 months or so. This problem is since 2 weeks only. Thanks, Sujal - Original Message - From: Erick B. To: Sent: Friday, January 25, 2002 12:47 PM Subject: Re: NM 2V [7:33166] Hi, Plug your modules

Re: NM 2V [7:33166]

2002-01-24 Thread Erick B.
alright for about 3 months or so. This problem is since 2 weeks only. Thanks, Sujal - Original Message - From: Erick B. To: Sent: Friday, January 25, 2002 12:47 PM Subject: Re: NM 2V [7:33166] Hi, Plug your modules, IOS, etc into the 2600/3600 memory calc tool