Re: OSPF over FR [7:70025]

2003-06-07 Thread The Road Goes Ever On
you may want to check out the OSPF config guide on my website www.chuckslongroad.info hint - in the world of Cisco certification, it is essential that you master OSPF over NMBA in all its manifestations. ""Catherine Wu"" wrote in message news:[EMAIL PROTECTED] > I am testing Hub-Spoke for OSPF

Re: OSPF over FR [7:70025]

2003-06-05 Thread The Road Goes Ever On
you may want to check out the OSPF config guide on my website www.chuckslongroad.info hint - in the world of Cisco certification, it is essential that you master OSPF over NMBA in all its manifestations. ""Catherine Wu"" wrote in message news:[EMAIL PROTECTED] > I am testing Hub-Spoke for OSPF

RE: OSPF over FR [7:70025]

2003-06-05 Thread Brian Dennis
You can not mix point-to-point and non-broadcast network types which is what you are trying to do. You can make them neighbors but they will never install routes into the routing table. Look at their OSPF databases and you will see the LSA's but the routers will not install them in the routing tabl

RE: OSPF over FR [7:70025]

2003-06-05 Thread Catherine Wu
Brian, Thank you very much for clarifying my concept. Catherine -Original Message- From: Brian Dennis [mailto:[EMAIL PROTECTED] Sent: Monday, June 02, 2003 4:40 PM To: 'Catherine Wu'; [EMAIL PROTECTED] Subject: RE: OSPF over FR [7:70025] You can not mix point-to-poi

RE: OSPF over FR [7:70025]

2003-06-03 Thread Troy Leliard
Hi Catherine, Because you are using point to point sub interfaces on the one routea and one the other just using the real interface, OSPF behaves differently and has different helo / dead timers etc, and this is why you are not getting all your routes. You need to make sure that all ospf interfa

Re: OSPF over FR [7:70025]

2003-06-03 Thread Danny Free
Catherine, You forget to define ospf network type in each frame interface. Add this interface config command: ip ospf network point-to-point Thank, Rivalino Exactly right but you will have to do 2 more things: 1)Since you changed the hello-interval to 30 on Router A's point-to-point subinte

Re: OSPF over FR [7:70025]

2003-06-03 Thread Rivalino YMT.
Catherine, You forget to define ospf network type in each frame interface. Add this interface config command: ip ospf network point-to-point Thank, Rivalino On Mon, 2 Jun 2003, Catherine Wu wrote: > I am testing Hub-Spoke for OSPF over FR, > > I verified the neighbor adjacency,but I couldn't s