check your ospf network types on both routers ( not the switch )
sh ip ospf interface
are you using subinterfaces on the 26 and 36 routers? physical interfaces?
mixture?
debug ip ospf adjacency is a great tool
configurations help
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mail
If the 7206 is only operating as a frame relay switch, it is irrelevant
to your OSPF configuration. Pretend that it doesn't exist. Your OSPF
configuration depends on how you've configured your 2610 and 3640. Try
configuring them with point-to-point subinterfaces and then configure
OSPF as you
If you are doing OSPF and using physical int., then you need map statements
with broadcast at the end. If sub int's you don't need map statements but
you must have network statements of course and a neighbor statement. You
don't need any OSPF config on your frame switch. e-mail me if you want t
The switch has nothing to do with OSPF, send your configs
dave
"[EMAIL PROTECTED]" wrote:
>
> I have a 2610 as one peer router and a 3640 as the other peer router. I
> have a 7206 operating as the "frame relay switch" between them. Layer 2
> and Layer 3 are fine because if I use static rout
I am using physical interfaces not subinterfaces. I am purposely using the
physicals instead of doing subs. Here are the two configs:
3640:
interface Serial0/0
ip address 1.1.1.6 255.255.255.252
encapsulation frame-relay
no fair-queue
router ospf 1
log-adjacency-changes
network 1.1.1.4 0.
Assuming your trying to connect the serials you need to put them in
the same subnet, try configuring the 2610 with 1.1.1.5 and of coarse the
correct OSPF network numbers. I'm not a big inverse arp fan either and
add frame-relay maps.
Dave
"[EMAIL PROTECTED]" wrote:
>
> I am using physical in
6 matches
Mail list logo
