Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but try the following
Ra#
Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but try the following
Ra#
Wow--what timing. I'm just writing a section on troubleshooting ISDN...
Try debug ISDN ppp authentication. You should see why you've got a
failure problem. I suspect you've got a problem with the usernames and
passwords not matching.
-- Leigh Anne
-Original Message-
From: [EMAIL
Omer,
Check the following to start with:
a) make sure your interface s0 or s1 has the proper commands
such as bandwidth, clock rate and correct ip address, and no shut
Since you have not given the config outputs, it is very hard to visualise
what is missing, but compare the following config
welcome to PPP!
Are you doing it over serial interfaces?
Post the configuration
-e-
- Original Message -
From: Omer Ehsan Dar
To:
Sent: Sunday, September 30, 2001 8:34 PM
Subject: PPP Authentication [7:21533]
Hi all,
I just wanted to know how i can get pp authentication to
5 matches
Mail list logo
