I don't think the 677 even runs IOS.
Regards,
Rah
-Original Message-
From: Frankie Chiang [mailto:[EMAIL PROTECTED]]
Sent: 01 March 2002 09:11
To: [EMAIL PROTECTED]
Subject: Re: PPPoE [7:36910]
Dear Mark,
Can this apply to Cisco 677 ?
Best Regard,
Frankie
""Mark Od
Dear Mark,
Can this apply to Cisco 677 ?
Best Regard,
Frankie
""Mark Odette II"" Jim, the following should work for you on a 1750 with
the WIC1-ENET card
> (required for PPPoE Support as of 12.1.x):
>
> version 12.1
> !
> vpdn enable
> no vpdn logging
> !
> vpdn-group sbc
> request-dialin
>
Jim, the following should work for you on a 1750 with the WIC1-ENET card
(required for PPPoE Support as of 12.1.x):
version 12.1
!
vpdn enable
no vpdn logging
!
vpdn-group sbc
request-dialin
protocol pppoe
!
interface Ethernet0
no ip address
no ip mroute-cache
full-duplex
pppoe enable
ppp
Short Answer- Yes.
Long Answer, You'll need to create a VPDN group/dialer interface (I've done
this before, but can't remember the steps right off the top of my head).
The VPDN piece of the config will take care of the PPPoE Authentication and
ATM "Bridging" (no flames on the terminology plea
4 matches
Mail list logo