How about attaching a break-out box and connecting an oscilloscope to the
clocking signal.
Chances are I'm not being too helpful here am I?
Would be handy if Cisco boxes could report on the actual clocking speed.
Anybody know why this isn't already a feature?
Gaz
STRAND Scott wrote in message
Show controllers gives a received clockrate.
Thanks
-Nate
STRAND Scott wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
How do you tell the actual speed of a serial interface. I know it is not
the
BW command and there is no clock rate set. Is there a
command?
Thanks,
Scott
For frame-relay or point-to-point?
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
877.418.4025
http://www.kg2.com
- Original Message -
From: STRAND Scott
To:
Sent: Thursday, May 31, 2001 2:06 PM
Subject: Speed of a serial interface [7:6645]
How do you tell the
I assume that this is a serial interface with no integrated CSU/DSU, and in
that case the only way that I know of to tell the speed is to look at the
external CSU/DSU and find out how many timeslots are configured. Hope this
helps.
Guy
-Original Message-
From: STRAND Scott
Guy,
You're right, it is an external CSU/DSU that is in a remote location.
Thanks for the help.
Scott
Lupi, Guy wrote:
I assume that this is a serial interface with no integrated CSU/DSU, and in
that case the only way that I know of to tell the speed is to look at the
external CSU/DSU and
5 matches
Mail list logo
