Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Odd - this link didn't work for me until I replaced the "cco-rtp-1" host with plain ol' "www"...if anyone else had this problem, give it a shot. > http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa tion_guide_chapter09186a008007dfd0.html BJ Message Posted at: http://

Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Hi, Your problem is the line speed. Register value 0x2132 specifies the line speed. Change it and you will sleep well tonight otherwise, declare no-sleep on yourself... Further reading : http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186 a00800a65a5.shtml Regards. Godsw

Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

o.com/en/US/products/hw/routers/ps259/products_installation_g > uide_chapter09186a008007e02e.html > > Tells how to change console speed settings from the rommon prompt. > > > -Original Message- > > From: Munit Singla [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, December 19, 2002 3:0

RE: confreg 0x2132 instead of confreg 0x2142 [7:59549]

settings from the rommon prompt. > -Original Message- > From: Munit Singla [mailto:[EMAIL PROTECTED]] > Sent: Thursday, December 19, 2002 3:07 PM > To: [EMAIL PROTECTED] > Subject: Re: confreg 0x2132 instead of confreg 0x2142 [7:59549] > > > Ted great, > can

Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Ted great, can u refer me doc for this settings and speed regarding this I couldn't find Regards, Munit. Ted Marinich wrote: > Try changing your terminal speed to 19200 baud. 0x2132 sets the console > baud rate to 19200. > > Ted Message Posted at: http://www.groupstudy.com/form/read.php?f=7

Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Hey what i supect is hyperterminal settings problem.Please do confirm whether u have thse settings.. Bits per sec: 9600 Data bits : 8 Parity : none Stop bits : 1 Flow control: none moreover still then try changing properties vty type/or speed if u have change

Re: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Go to the rom monitor mode and change your configuration register value. Press break key with in 60 seconds of router reboot,you will enter thier. then enter---> confreg 0x2142 >sync ->i(to reload) or use reset thats all bye Munit "[EMAIL PROTECTED]" wrote: > I

RE: confreg 0x2132 instead of confreg 0x2142 [7:59549]

Try changing your terminal speed to 19200 baud. 0x2132 sets the console baud rate to 19200. Ted Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59550&t=59549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/