all routing to cease.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ole Drews Jensen
Sent: Wednesday, March 06, 2002 10:56 AM
To: [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
Well, let's see it from a different angle. Normally, the left
So what is the final answer, is the calculator correct or is Ole?
-Original Message-
From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 05, 2002 5:54 PM
To: Lupi, Guy; [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
I do not agree with you.
The 2922
~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~
-Original Message-
From: Lupi, Guy [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 06, 2002 9:32 AM
To: 'Ole Drews Jensen'; [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
So what
AM
To: Lupi, Guy; [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
Well, let's see it from a different angle. Normally, the left byte is 21
hex, which is 0011 binary. Here bit 8 and 13 are set (bits 0 thru 7 are
in the right byte). This is what I normally have, and I can use BREAK
, 2002 10:47 AM
To: Lupi, Guy; [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
Well, let's see it from a different angle. Normally, the left byte is 21
hex, which is 0011 binary. Here bit 8 and 13 are set (bits 0 thru 7 are
in the right byte). This is what I normally have, and I can
In binary, 2922 is 0010 1001 0010 0010. Bit #11 being set to on is what
makes this a 9 vs. the standard 1 This changes the console speed to
4800 bps. That's all.
Kelly Cobean, CCNP, CCSA, ACSA, MCSE, MCP+I
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ole Drews Jensen
Sent: Wednesday, March 06, 2002 10:56 AM
To: [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
Well, let's see it from a different angle. Normally, the left byte is 21
hex, which
According to my config register calculator, the 9 means 9600 baud rate and
break is disabled.
-Original Message-
From: brian kastor [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 05, 2002 4:26 PM
To: [EMAIL PROTECTED]
Subject: confreg 0x2922 ??? [7:37318]
I have found a reason for the
~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~
-Original Message-
From: Lupi, Guy [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 05, 2002 4:02 PM
To: [EMAIL PROTECTED]
Subject: RE: confreg 0x2922 ??? [7:37318]
According to my config register calculator
According to my Handy Dandy Cisco Confreg Decoder Ring
(standard issue to Academy instructors) the 9 turns on bits 8 and 11
(leaving 910 set to zero) which sets the console baud rate to 4800
sets disable break key.
The bit functions are as follows (counting from right most position to left):
3
10 matches
Mail list logo