N
ip 10.1.19.1 atm-vc 1 broadcast
ip aaa.bbb.7.249 atm-vc 1 broadcast
appletalk 10119.1 atm-vc 1 broadcast
> -Original Message-
> From: Bullock, Jason [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, March 07, 2002 3:38 PM
> To: [EMAIL PROTECTED]
> Subject: RE: oc3 config [7
Just so happens I have one in the lab I just set up between a 7507 and a
12008. As
you can see there is not much to it. Set one side for clocking and rock n
roll. I have
no shaping defined so I have a full OC3.
Dave
7507
interface ATM0/1/0
ip address 100.1.1.1 255.255.255.192
no ip dir
Make sure that you ask the following from Verizon if you are configureing
POS OC3
Framing - SONET OR SDH
SONET is default for Cisco router
Clock - Internal or line
If back to back then one of your router is providing the clock
WIll be great if you have an Adtect tester so that you can test the
ral&s=Implementation_and_Configuration
-Sean
-Original Message-
From: Bullock, Jason [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 07, 2002 1:38 PM
To: [EMAIL PROTECTED]
Subject: RE: oc3 config [7:37587]
Guys,
I have been reading on the list for sometime, and I am always in awe.
A
Guys,
I have been reading on the list for sometime, and I am always in awe.
Anyone out there know a quick and dirty trick to configure a point to point
ATM OC3 between two cisco routers?
the line is offered by verizon and I am using 2 7500 cisco routers.
help.
thanks!
jason
Messag
5 matches
Mail list logo