RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Mechbal, Hind (MED-DEVOTEAM)
What is the configuration of the interface ? sh run int s2/0 just check that you have in the two sides the same keepalive and ppp encapsulation -Original Message- From: park jeongwoo [mailto:[EMAIL PROTECTED]] Sent: Friday, May 18, 2001 5:04 PM To: [EMAIL PROTECTED] Subject: point to

RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Lupi, Guy
Park, if you look at the output you can see that the last time you cleared the counters on the interface was approximately 18 hours ago: Last clearing of show interface counters 18:08:32 Since that time you have had: 8940 input errors, 1913 CRC, 0 frame, 6028 overrun, 0 ignored, 999 abort

RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Lupi, Guy
] Sent: 5/18/01 11:20 AM Subject: RE: point to point T1 troubleshooting [7:4987] What is the configuration of the interface ? sh run int s2/0 just check that you have in the two sides the same keepalive and ppp encapsulation -Original Message- From: park jeongwoo [mailto:[EMAIL PROTECTED

Re: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Brijesh
- Original Message - From: Mechbal, Hind (MED-DEVOTEAM) To: Sent: Friday, May 18, 2001 08:50 PM Subject: RE: point to point T1 troubleshooting [7:4987] What is the configuration of the interface ? sh run int s2/0 just check that you have in the two sides the same keepalive and ppp

Re: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Circusnuts
-DEVOTEAM) To: Sent: Friday, May 18, 2001 11:20 AM Subject: RE: point to point T1 troubleshooting [7:4987] What is the configuration of the interface ? sh run int s2/0 just check that you have in the two sides the same keepalive and ppp encapsulation -Original Message- From: park jeongwoo

RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Daniel Cotts
The following link might help: http://www.ieng.com/univercd/cc/td/doc/product/voice/ics7750/tblshoot/tsseri al.htm Watch the wrap. -Original Message- From: park jeongwoo [mailto:[EMAIL PROTECTED]] Sent: Friday, May 18, 2001 10:04 AM To: [EMAIL PROTECTED] Subject: point to point T1

RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Debbie Westall
Park, I had exactly the same problem this morning on a point-to-point circuit. I power cycled CSUs on both ends and everything came back up. If that doesn't work, and your CSUs support it, you may want to throw a loopback towards one end and check to see if the router sees it. The interface

RE: point to point T1 troubleshooting [7:4987]

2001-05-18 Thread Graham, Darel R.
] Subject: RE: point to point T1 troubleshooting [7:4987] The following link might help: http://www.ieng.com/univercd/cc/td/doc/product/voice/ics7750/tblshoot/tsseri al.htm Watch the wrap. -Original Message- From: park jeongwoo [mailto:[EMAIL PROTECTED]] Sent: Friday, May 18, 2001 10:04 AM