I dont think the original question made any sense.
Duck
- Original Message -
From: Priscilla Oppenheimer [EMAIL PROTECTED]
To: lawrence sculark [EMAIL PROTECTED]; [EMAIL PROTECTED];
[EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, November 08, 2000 4:37 PM
Subject: Re: Routing
You can redistribute static routes, which protocol do static routes use
Duck
- Original Message -
From: lawrence sculark [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, November 08, 2000 3:08 PM
Subject: Re: Routing protocol
look up
look up "redistribution"..it will set you on the right path...lawrence
From: "Donald B Johnson Jr" [EMAIL PROTECTED]
Reply-To: "Donald B Johnson Jr" [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Routing protocol
Date: Thu, 9 Nov 2000 17:28:38 -0800
MIME-Version: 1.0
A bunch of different concepts are getting mixed up in this discussion.
Here's a quick note to clear the air.
A routing protocol learns the path(s) to remote networks. Examples are
OSPF, RIP, EIGRP, BGP, RTMP, AURP, Novell RIP and NLSP, etc.
EIGRP is a routing protocol that can handle routing
www.cisco.com
- Original Message -
From: . [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 4:35 PM
Subject: Routing protocol timers
Hello Friends
Could someone explain to me what happens when the invalid timer expires.
And what happens to the route between
Hi Evan,
Ospf is like 6 equal cost paths and EIGRP is like 4 equal or unequal cost
paths. EIGRP is more flexible to have unequal load balancing.
Cu
Geert Hampe
CCNP+Voice+ATM CCDP
Evan You [EMAIL PROTECTED] wrote in message
001001bff708$38afaf20$[EMAIL
On Wed, 26 Jul 2000, Evan You wrote:
What is the maximum number of equal-path equal-cost load sharing / balancing
will OSPF or EIGRP do?
6 i believe, and I believe 4 is the default.
Brian
Basically, I have 12 T1 circuits that I am thinking of load-sharing between
two Data Centers. I am
internationally (I
know, I work for WorldCom).
- Evan
-Original Message-
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 26, 2000 11:02 AM
To: Cisco Mail List; Evan You
Subject:RE: Routing Protocol Load-Sharing
Evan, at some point you might want to look
I believe the no# is 6
Duck
- Original Message -
From: Evan You [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, July 26, 2000 6:48 AM
Subject: Routing Protocol Load-Sharing
What is the maximum number of equal-path equal-cost load sharing /
balancing
will OSPF or EIGRP do?
Buddy Venne
-Original Message-
From: Jorge Rodriguez [mailto:[EMAIL PROTECTED]]
Sent: Sunday, May 28, 2000 8:24 PM
To: fanj; [EMAIL PROTECTED]
Subject: Re: routing protocol
Try www.netsys.com http://www.netsys.com go to technical library .
You can find TCP/UDP port numbers
RFC
1700 is a good place to start
ftp://ftp.isi.edu/in-notes/rfc1700.txt
you
might want to bookmark the following link. you will be referring to it often
during your studies going forward.
http://www.rfc-editor.org/rfc.html
HTH
Chuck
-Original Message-From: [EMAIL PROTECTED]
Some routing protocols run right on top of IP, some on top of UDP, some on top
of TCP, and IS-IS runs directly over the data-link layer, so researching the
answer is a bit difficult.
Your best bet is to go to the RFC for the protocol of interest or RFC 1700,
the
Assigned Numbers RFC, as Chuck L.
Try www.netsys.com go to
technical library .
You can find TCP/UDP port numbers by
protocol
Jorge Rodriguez /CCNANetwork Services
AnalystRS Networks Inc1112 Boylston Street #222Boston, MA
021151-781-614-1294http://www.netwire.n3.net/http://www.learncisco.n3.net/
- Original
13 matches
Mail list logo
