At 11:06 AM 12/6/00, you wrote:
>Hi Priscilla,
>
>Is there a way to increase the round trip delay (expected delay 400ms)
>between two back to back connected CISCO routers using an IOS command.
>
>This is to simulate a satalite link delay between two CISCO routers (
>approximately 400-600 ms) on a
Hi!
On Ethernet it's impossible without some kind of repeater or low-end
gateways.
Try to configure NT server with two Ethernet NICs on i386 computer and try
to load it with many computation and bus manipulating - you'll get PROPER
delay.
On Serial 'clock rate' is helpful, but real satellite de
You might experiment with traffic shaping. If you set it low enough
you will decrease the routers effective use of the available bandwidth.
Note this will NOT lower the delay. But it might approximate what
you're looking for.
Marty Adkins Email: [EMAIL PROTECTED]
Mentor Tech
software is one.
http://www.adtech-inc.com/products/ipwave.asp is another.
> -Original Message-
> From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 06, 2000 1:01 PM
> To: ROSHAN FERNANDO; [EMAIL PROTECTED]
> Subject: Re: simulating delay on C
tech-inc.com/products/ipwave.asp is another.
> > -Original Message-
> > From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, December 06, 2000 1:01 PM
> > To: ROSHAN FERNANDO; [EMAIL PROTECTED]
> > Subject: Re: simulating delay on Cisco routers i
5 matches
Mail list logo