and check if the primary
is
> active and after the rebooted pix comesup ? What is OS version of your PIX
?
>
> Vamsi
> - Original Message -
> From: "mike Dang"
> To:
> Sent: Friday, October 25, 2002 1:02 PM
> Subject: Re: PIX failover problem [7:56199]
&
Has anyone faced this problem ? What is the normal practice of
> connecting PIX in failover configuration ? through cross over cable or
> through a separate switch ?
> Pls reply.
>
> Regards,
> Vamsi
> - Original Message -
> From: "Patrick Donlon"
> To:
>
ting PIX in failover configuration ? through cross over cable or
through a separate switch ?
Pls reply.
Regards,
Vamsi
- Original Message -
From: "Patrick Donlon"
To:
Sent: Thursday, October 24, 2002 4:11 PM
Subject: Re: PIX failover problem [7:56199]
> I think you've go
I think you've got your config correct, when any of the interfaces go down
on the active PIX it will switch into standby. So when you reboot the
standby it will cause this to happen, the documentation does say you should
use a separate switch for the failover NICs which should prevent this,
http://
normal practice of
connecting PIX in failover configuration ? through cross over cable or
through a separate switch ?
Pls reply.
Regards,
Vamsi
- Original Message -
From: "Patrick Donlon"
To:
Sent: Thursday, October 24, 2002 4:11 PM
Subject: Re: PIX failover problem [7:56
5 matches
Mail list logo