switch1 (enable) set port duplex 6/8 half
Port 6/8 is in auto-sensing mode.
The above switch is a 6500. AS i understand, the ports can be set to
full,half or auto but when i try setting it to half, it doesn't allow me to.
thank you
Message Posted at:
You need to change the speed first, then you can change the duplex. It has
to be in that order.
SamN wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
switch1 (enable) set port duplex 6/8 half
Port 6/8 is in auto-sensing mode.
The above switch is a 6500. AS i understand, the
Sam,
Speed and Duplex are tied at the hip - if speed is auto, duplex must be
auto. Try hard-coding the speed, first, then the duplex.
-Bob Sinclair
- Original Message -
From: SamN
To:
Sent: Tuesday, February 18, 2003 12:18 PM
Subject: Switch Port [7:63275]
switch1 (enable) set
You first have to set the speed, it currently in auto.
C6509 (enable) set port speed 5/8 auto
Port(s) 5/8 speed set to auto detect.
C6509 (enable) set port duplex 5/8 half
Port 5/8 is in auto-sensing mode.
C6509 (enable) set port speed 5/8 100
Port(s) 5/8 speed set to 100Mbps.
C6509 (enable)
4 matches
Mail list logo