show ip traffic output

Hi group The following is a show ip traffic output from a Cat 2900XL: Rcvd: 18668088 total, 17981099 local destination 0 format errors, 0 checksum errors, 0 bad hop count 0 unknown protocol, 686989 not a gateway 0 security failures, 0 bad options, 0 with options Any

Re: Traffic output

ROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 16, 2000 4:32 AM Subject: Re: Traffic output > Turn on "ip accounting" on the interface you want to watch (outgoing packets > only, I believe) and then "show ip accounting" to see the results. > > John

Re: Traffic output

Turn on "ip accounting" on the interface you want to watch (outgoing packets only, I believe) and then "show ip accounting" to see the results. John > Hi There, > > While troubeshooting for load issue on our existing T1, I discovered a high > usage under tx/load and rx/load counters. But w

Re: Traffic output

[EMAIL PROTECTED] wrote: > > Are you thinking of IP (or IPX) accounting? > > It needs to be enabled on the interface (from memory, 'ip > accounting' or something similar). Then 'show ip accounting' will > give number of bytes and packets for each source/destination pair. On higher end and ne

Traffic output

l Mair" <[EMAIL PROTECTED]> on 15/06/2000 15:32:40 Please respond to "Yeshpal Mair" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc: [EMAIL PROTECTED] (bcc: JENNY MCLEOD/NSO/CSDA) Subject: Traffic output Hi There, While troubeshooting for load issue on our existin

Traffic output

Hi There, While troubeshooting for load issue on our existing T1, I discovered a high usage under tx/load and rx/load counters. But what I was trying to get was and I can't remember the show <.> command for the life of me which displays the source, destination and I beileve the bytes count