I am in need of a quick help.
I am configuring VOIP between two site over the internet. Each site has
it's own PBX and 2620.
The 2620 has HDV module with T1 interface directly connected the PBX via EM
winkstart.
The connection between PBX and Router is fine at both sites.
At site 1, they have
I think the non-wildcard digits on POTS dial peers get stripped before they
are outpulsed. So you might need a 'prefix 79' under the 'dial-peer voice 1
pots' .
Good Luck,
Vance
Firesox wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am in need of a quick help.
I am
Voice Gurus: I'm going to take a stab on this because I just went through
some of this myself (with 2610s but hey same deal)... feel free to point
out my mistakes
If you are doing an EM trunk between the two PBXs (with the VoIP link
acting as the router), then the dialing information
My previous post and this URL are strictly for permanent voip trunks between
PBXs.
Sorry... I meant to include an URL.. One thing I did NOT like about this
example tho, is that they are doing as I mentioned and configured a separate
DS0 group for every DS0 and therefore they end up with
4 matches
Mail list logo