Hello allsetting up a small lab w/2 2621's. Would like to create a
WAN cable to be able to bring up a serial connection between routers. Is
it possible and if so, what is the pin-out's to custom create it
Thx
Chris
Message Posted at:
get a cross over cable from ebay.com
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC Connection [7:12668]
Hello allsetting up a small lab w/2 2621's. Would like to create a
WAN cable
Just a standard CAT5 cross-over
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12672t=12668
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
julho de 2001 13:23
Para: [EMAIL PROTECTED]
Assunto: RE: WIC to WIC Connection [7:12668]
get a cross over cable from ebay.com
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC
:RE: WIC to WIC Connection [7:12668]
Just a standard CAT5 cross-over
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions
I used a CAB-SSV35MT and a CAB-SSV35FC.
- Original Message -
From: Farhan Ahmed
To:
Sent: Tuesday, July 17, 2001 1:23 PM
Subject: RE: WIC to WIC Connection [7:12668]
Acesso pelo menor prego do mercado! R$ 14,90 nos 3 primeiros
meses!
ASSINE AGORA! http://www.bol.com.br
for $5.
If you want to connect 2 serial interfaces, then you need a DTE-DCE cable.
These are available from www.pacificcable.com.
-ejay
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 12:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC Connection
:04 PM
Subject: RE: WIC to WIC Connection [7:12668]
Acesso pelo menor prego do mercado! R$ 14,90 nos 3 primeiros
meses!
ASSINE AGORA! http://www.bol.com.br/acessobol/
I'm not sure if a cross cable is enough. What about the clock ? If
we have 2
DTE cables are we able to generate the clock
17, 2001 9:42 PM
To: [EMAIL PROTECTED]
Subject: Re: WIC to WIC Connection [7:12668]
You're correct. It will need a DTE and a DCE cable. The part numbers
are CAB-V35MT(dte cable) and a CAB-V35-FC(dce cable).
He need to configure the clock on the interface:
config-if#clock ra
9 matches
Mail list logo