HI All,
Got a strange problem on a 3524xl switch.
Problem: Need to create 2 VLANS . I issue the statements
interface vlan 1
ip address 10.64.18.250 255.255.255.0
no shut
interface vlan 2
ip address 10.64.19.25 255.255.255.0
no shut
However, when I run "sh ip interfaces" , I see that o
Hi John,
The VLAN Interfaces on the 3500/2900 XL series are
management VLANs only and there can only be one up at
a time.
--- John Brandis wrote:
> HI All,
>
> Got a strange problem on a 3524xl switch.
>
> Problem: Need to create 2 VLANS . I issue the
> statements
>
> interface vlan 1
Management.
Thanks
Larry
-Original Message-
From: John Brandis [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 19, 2002 10:58 PM
To: [EMAIL PROTECTED]
Subject: interface vlan 1 --> no shut [7:53682]
HI All,
Got a strange problem on a 3524xl switch.
Problem: Need to create 2 VLA
If the 3524 is like the 2950 then you just assign the interfaces to the
VLAN's directly.
For example:
Sw(config)# int fa0/5
Sw(config-if)# switchport access vlan 10
Sw(config-if)#int fa0/6
Sw(config-if)# switchport access vlan 10
and so on.
You don't create the vlans separately.
BTW, when you cr
Thanks,
Yes i was in sub interface mode now I think about it.
Thanks for the heads up.
jb
-Original Message-
From: Tom Lisa
To: [EMAIL PROTECTED]
Sent: 9/20/2002 3:51 PM
Subject: Re: interface vlan 1 --> no shut [7:53682]
If the 3524 is like the 2950 then you just assign
Hi All,
Tom very rightly pointed the management VLAN stuff. I would like to add on
one more thing into it. What you were trying to do was, that you were trying
to up a layer three interface, whereas VLANS, a layer two entity are created
in the VLAN Database.
regards,
Vikram
Get Your Private,
6 matches
Mail list logo