RE: oc3 config [7:37587]

2002-03-07 Thread Bullock, Jason
Guys, I have been reading on the list for sometime, and I am always in awe. Anyone out there know a quick and dirty trick to configure a point to point ATM OC3 between two cisco routers? the line is offered by verizon and I am using 2 7500 cisco routers. help. thanks! jason Messag

RE: oc3 config [7:37587]

2002-03-07 Thread Sean Knox
ral&s=Implementation_and_Configuration -Sean -Original Message- From: Bullock, Jason [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 07, 2002 1:38 PM To: [EMAIL PROTECTED] Subject: RE: oc3 config [7:37587] Guys, I have been reading on the list for sometime, and I am always in awe. A

Re: oc3 config [7:37587]

2002-03-07 Thread QOSMAN
Make sure that you ask the following from Verizon if you are configureing POS OC3 Framing - SONET OR SDH SONET is default for Cisco router Clock - Internal or line If back to back then one of your router is providing the clock WIll be great if you have an Adtect tester so that you can test the

Re: oc3 config [7:37587]

2002-03-07 Thread MADMAN
Just so happens I have one in the lab I just set up between a 7507 and a 12008. As you can see there is not much to it. Set one side for clocking and rock n roll. I have no shaping defined so I have a full OC3. Dave 7507 interface ATM0/1/0 ip address 100.1.1.1 255.255.255.192 no ip dir

RE: oc3 config [7:37587]

2002-03-07 Thread Daniel Cotts
N ip 10.1.19.1 atm-vc 1 broadcast ip aaa.bbb.7.249 atm-vc 1 broadcast appletalk 10119.1 atm-vc 1 broadcast > -Original Message- > From: Bullock, Jason [mailto:[EMAIL PROTECTED]] > Sent: Thursday, March 07, 2002 3:38 PM > To: [EMAIL PROTECTED] > Subject: RE: oc3 config [7