p-t-p serial w/ diff subnet address al points [7:34741]

Here are 2 routers linked by a point to point hdlc serial line. We have 10.1.1.1/8 at routerA and 192.168.1.1/24 at routerB. Seems it works. Why ? The same story w/ different subnet address assigned to the edges of a tunnel (by specifying ip unnumbered from Fa ) Constantin Tivig Message P

Re: p-t-p serial w/ diff subnet address al points [7:34741]

I'll have a stab. If you're using routes to the interface (which I guess you must be) rather than the next hop (IP ROUTE 10.0.0.0 255.0.0.0 Serial 0) then I would imagine that the router is not too bothered about the next hop address, it just shoves the data on the line and the other end wi

RE: p-t-p serial w/ diff subnet address al points [7:34741]

I have seen the same thing. However, I've only seen it when the P-To-P link is setup using MultilinkPPP. We tried many times to configure a Multilink PPP point-to-point pipe (usually 2 or 3 T1s bonded together) with IPs in the same /30 subnet and could not get things to work. But as soon as we

RE: p-t-p serial w/ diff subnet address al points [7:34741]

PROTECTED] Subject: RE: p-t-p serial w/ diff subnet address al points [7:34741] I have seen the same thing. However, I've only seen it when the P-To-P link is setup using MultilinkPPP. We tried many times to configure a Multilink PPP point-to-point pipe (usually 2 or 3 T1s bonded together)