I thks to all of you for showing a helping hand.
Really appreciate.
Regrds.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27959&t=27288
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repor
This may help:
http://www.cisco.com/warp/public/125/fr_isdn_backup.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27398&t=27288
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
Quote
Message not compatible with call state
Message type
Remote equipment received an unexpected message that does not correspond to
the current state of the connection. This is usually due to a D-channel
error.
Unquote
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122sup/122d
Further to my own email, this link may be of use - it discusses the
difference between backup interfaces, floating static routes, and dialer
watch...
http://www.cisco.com/warp/public/123/backup-main.html
JMcL
- Forwarded by Jenny Mcleod/NSO/CSDA on 26/11/2001 04:53 pm -
I have add in the ppp authenication chap command at both physical and
logical interfaces.
This is my output of debug q931 commnad :
The message "Message not compatible" seems to be the problem, can anyone
highlight me what does it mean ?
01:00:52: ISDN BR0/0: RX on B1
at 64 Kb/
01:00:22550488
thony
Toh"
cc:
Sent by: Subject: problem in router
c
Well, the trouble that you are seeing is prolly caused when say for example
you bring a SErial interface down on one end, but the switch(carrier
network) reports the link as being up to the serial interface on the other
end, so it doesnt switch to ISDN. I have seen this issue with particulary
ATM
Try add int BRI0 subcommand 'ppp authentication chap' in both routers. This
must be configured on both physical and logical interfaces.
""Anthony Toh"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,I am trying to configure two 2600 series routers to run in a Frame
Relay
> ne
Hi,I am trying to configure two 2600 series routers to run in a Frame Relay
network with an ISDN dial line as backup operation.
The Frame Relay configuration is working alright but the ISDN is not.
With reference to the figure below :
R1---S1Frame RelayS0---R2
\---Bri0-ISDN--Bri
9 matches
Mail list logo
