I guess I need to clarify this a little. Yes, I'm talking about Cisco
switches, 6509 & 5000's. No, I'm not looking for MAC addresses. I thought
that there was a command that would list the IP of all connecting devices on
(all) ports on the switch. The "sho cdp nei det" or other variations only
sho
Try sh mls entry.
Your 6509 will have this feature by default. But do you have a RSM module
for the 5000?
Good luck.
""Sites, Bob"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]..
.
> I guess I need to clarify this a little. Yes, I'm talking about Cisco
> switc
What about looking at the arp cache "sh ip arp" or "sh cam dynamic"
This will list the port, mac, ip relationships on a switch.
Pete
*** REPLY SEPARATOR ***
On 11/14/2000 at 11:51 AM Sites, Bob wrote:
>I guess I need to clarify this a little. Yes, I'm talking about Cisco
>sw
I'm not sure what is downstream of your switch, what types of devices, but
I'm pretty damn sure that there is no command on a catalyst switch (a layer
two device) which will tell you the IP addresses of the devices connected
to it. The switch not only doesn't know, it doesn't care. Presumably you
TECTED]>
To: "Peter Van Oene" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, November 14, 2000 3:27 AM
Subject: Re: switch port IP address
>
> I'm not sure what is downstream of your switch, what types of devices, but
> I'm pretty damn sure that th
Thanks Scott, this was the command that I had forgotten about and was
looking for. Those of you with 6k & 5k switches out there try it out. Pretty
useful at times.
BobS
From: Scott M. Trieste
Sent: Tuesday, November 14, 2000 12:24 PM
To: [EMAIL PROTECTED]
Subject: Re: switch port IP add
> Thanks Scott, this was the command that I had forgotten about
and was looking for. Those of you with 6k & 5k switches out
there try it out. Pretty useful at times.
>
***
>
> Try sh mls entry.
>
> Your 6509 will have this feature by default. But do you have
a RSM module for the 5000?<
7 matches
Mail list logo
