Thanks all but it does not support the interface range command so I had to
do it thru the gui!
-Original Message-
From: Larry Letterman [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 20, 2003 5:45 PM
To: [EMAIL PROTECTED]
Subject: Re: vlan on a 3548 catalyst [7:61398]
Its
Bob Perez wrote in message news:...
Can I assign multiple ports to a vlan in one swoop rather than each
one individually?
IOS on a 3548XL
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61398t=61398
--
FAQ, list archives,
I don't have a 3548 to look at but does it supoort the interface
range command? if so yes you do have the one swoop capability.
Dave
Robert Perez wrote:
Bob Perez wrote in message news:...
Can I assign multiple ports to a vlan in one swoop rather than each
one individually?
IOS on a
Bob
I think the command you want is
int range first -last
in global config mode.
eg
switch# config term
switch(config)# interface range fastethernet0/1 -fastethernet0/12
(or something similar as I dont have an IOS switch to hand right now)
Then just configure the
- Original Message -
From: MADMAN
To:
Sent: Monday, January 20, 2003 1:31 PM
Subject: Re: vlan on a 3548 catalyst [7:61398]
I don't have a 3548 to look at but does it supoort the
interface
range command? if so yes you do have the one swoop
capability.
Dave
Robert Perez wrote
5 matches
Mail list logo