This weekend I purchased 2 Cisco routers 2501 w 2 serial and 1 Ethernet
ports I have a
2600With a T1 csu/dsu card and 2 fast Ethernet ports. I am creating a set up
to link all three
together to prepare for ccnp exams. I understand that I am going to need an
external
Csu/dsu and a t1
The DCE/DTE cable is all you need. On the cable that is marked DCE you must
use the clockrate 64000 under the seral port you are using.
If the cable is not marked, do a show controller int s0 and it will show
what serail port is a DCe, which is a DTE. To simulate frame-relay all that
is necessary
together to prepare for ccnp exams. I understand that I am
going to need an external Csu/dsu and a t1 crossover I believe.
It sounds like you just need another DTE cable to attach to the external
CSU/DSU. The T1 crossover will work to connect the two.
There is a white paper on the ccprep
3 matches
Mail list logo
