Hi,
The same. You need something like ASR1k or something in the ISR range to do
NAT.
Depending on the SLAs with the service and amount of bandwidth you could
consider something like a Raspberry PI (or other SoC) on a stick to do NAT
as well.
kind regards
Pshem
On Tue, 29 Sep 2015 at 15:36 Aaron
Thanks
ASR920 ?
Aaron
From: Pshem Kowalczyk [mailto:pshe...@gmail.com]
Sent: Monday, September 28, 2015 8:50 PM
To: Aaron; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] PE NAT / VRF Aware NAT on PE
Hi,
ME3600 does not support NAT.
kind regards
Pshem
On Tue, 29 Sep
Hi,
ME3600 does not support NAT.
kind regards
Pshem
On Tue, 29 Sep 2015 at 14:46 Aaron wrote:
> Anyone know how to do PE NAT / VRF Aware over MPLS L3VPN on an ME3600 ?
>
>
>
> I edge in ip traffic on ME3600's as the PE to MPLS L3VPN.
>
>
>
> I was wanting to make the customer-facing port of t
Hi,
Just replying to my own post, but adjusting ospf cost to 2 on the new link
appears to have given me the result I was after.
From: cisco-nsp on behalf of CiscoNSP List
Sent: Tuesday, 29 September 2015 7:21 AM
To: Adam Vitkovsky; cisco-nsp@puck.net
Anyone know how to do PE NAT / VRF Aware over MPLS L3VPN on an ME3600 ?
I edge in ip traffic on ME3600's as the PE to MPLS L3VPN.
I was wanting to make the customer-facing port of the ME3600 as the ip nat
inside port, but I don't know how / what would be the ip nat outside
interface since i
Hi Everyone - Just an update to this - Spent some time with TAC, and they
agreed it appeared to be the bug that has been mentioned on the list(So thanks
very much!!), so disabled FRR on the ME's vlan Interface, and returned ospf to
default settings on the new link, and no more BGP drops etc - So
is anyone have experience with routing between vlan for hp procurve
switch's cuz i have a project to do with this switches so if can anyone
recommend to me what the best to configure i already making the routing
between vlan in the firewall and i need to move it to distribution switches
if you hav
Hi,
On Mon, Sep 28, 2015 at 03:59:29PM +0200, Mohamed Nagy wrote:
> is anyone have experience with routing between vlan for hp procurve
> switch's cuz i have a project to do with this switches so if can anyone
> recommend to me what the best to configure i already making the routing
> between vlan
Hello Guys,
is anyone have experience with routing between vlan for hp procurve
switch's cuz i have a project to do with this switches so if can anyone
recommend to me what the best to configure i already making the routing
between vlan in the firewall and i need to move it to distribution switche
On 28 September 2015 at 13:54, Mark Tinka wrote:
> Is there anyone on the list who is having a trouble-free meal of it in
> 2015? If so, which platforms? Any special conditions.
>
> On my end, still staying away from on both all of our Cisco and Juniper
> platforms (running recent code and hardwar
On 28/Sep/15 14:49, John Kougoulos wrote:
> Hi,
>
> perhaps here:
> http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/upgrade/521_N1_8/n5k_upgrade_downgrade_521.html#pgfId-641259
> or here: http://www.mostlynetworks.com/2013/07/no-issu-for-you/
Perhaps this is my chance to s
Hi,
perhaps here:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/upgrade/521_N1_8/n5k_upgrade_downgrade_521.html#pgfId-641259
or here: http://www.mostlynetworks.com/2013/07/no-issu-for-you/
Regards,
John
On Mon, Sep 28, 2015 at 2:35 PM, Harry Hambi - Atos
wrote:
> Hi all
Hi all,
I came across a cisco document which mentioned that with LACP fast enabled on
port channels ISSU cannot be guaranteed, I don't seem to be able to find this
document. Has anyone else come across this?.
Rgds
Harry
Harry Hambi BEng(Hons) MIET Rsgb
__
13 matches
Mail list logo