[c-nsp] 7609 local vlan significance

--- Begin Message --- Hi all, I have a 7609 with 15.2(4) software on it and both ES+ & WS-X6516 cards in it. Historically (prior to ES+ cards) to get traffic between VRF's we had a cable from the 6516 card to another box right beside the 7609 and we ran a VLAN across this cable with one end

Re: [c-nsp] ASR1001-X etherchannel subinterfaces

Have you evaluated ASR9001-S running as BRAS? You have IOS-XR instead and perhaps the price is slightly lower than the ASR1001-X. Best Regards Ted Johansson -Original Message- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Chris Balmain Sent: den 11 oktober

[c-nsp] ASR1001-X etherchannel subinterfaces

Hi there, We're currently evaluating ASR1001-X with XE 3.16.00S / 15.5(3)S running BRAS role "on a stick" using 2x10G in an LACP etherchannel. We've noticed that on dot1q subinterfaces on the bundle, while input counters appear to function normally, output counters massively under-read (not

Re: [c-nsp] Static Virtual Tunnel Interface: No phase 2 proposal

sorry Nick... omitted to include you on the reply. thanks again. On 7 October 2016 at 09:01, eyeballi77 wrote: > hello all... > > Hoping I can get some input on an issue I am having with the above. > > I have a ASR1002X as a PE that I am also trying to terminate a small

[c-nsp] IPv4 Multicast (Non-MVPN) MPLS - Single RP for multiple groups

Hi folks, ..need some help.. I have tried to add add a new group (2) on an existing RP and working setup used by group 1 Group 1 = 225.10.10.12 Group 2 = 225.10.10.13 Mode = sparse RP mapping = static with ACL The group 1 setup is build on VDSL/PPPoE into MPLS with GRE tunnel for mcast with