Heya James,
We still have a TAC case open with Cisco, they seem to be scratching
their heads as to why this is happening, the usual rigmarole, but did
provide 2x bug id's which seems to relate -- CSCvs91974 & CSCvk45012.
Right now we've seen the issue mainly affected by some of our
customers using
howdy,
also same, running ASR1002-HX on 16.12.04, same outputs, IDPROM FIELD
FORMAT ERROR haven't had issues yet.
On Thu, Dec 16, 2021 at 8:47 AM Robert Blayzor via cisco-nsp
wrote:
>
>
>
>
> -- Forwarded message --
> From: Robert Blayzor
> To: cisco-nsp@puck.nether.net
> Cc:
>
Hi folks,
Wondering if anybody came across an issue with NCS-5501 models doing
EVPN Active/Active with Anycast IRB gateways. We have a multitude of
BVI's, with L2VPN and EVPN configured between a pair ov NCSs and using
a ESI for Bundle-Ether40 connected to downstream Nexus's.
The config i'm using
+1 on the NCS55A1's. We're using the NCS55A1-24H as P nodes + the flex
consumption model, and works like a charm. Haven't had issues yet and
works perfectly with just the CORE QOS policies attached.
On Fri, Dec 11, 2020 at 5:15 AM Dave Bell wrote:
>
> NCS55A1 is reasonable. 36x100G ports. There a
We're deploying some new POPs with a mix of IOS-XR as borders, BNG and
PEs and IOS-XE for LNSs. LDPv6 would be awesome to have availabke on
IOS-XE alongside LDPv4. We're being pushed by Cisco to go one flavour
or another of SR as well by Cisco, but i'd much prefer to have LDPv4 &
LDPv6 right now.
Hi,
I'm assuming that you have already setup accounting to be pushed thru to
your ACS ?
On your acs you can selectively choose what you want to log.
Essentially, you can use either RADIUS or TACACS+ to log your accounting
packets. I'd prefer the Radius method though, especially since it is for
re
what kinda issues are you having ?i've rarely found a problem that
required debugging and all...
regards,
On Tue, 2008-09-23 at 20:27 +0800, Wilkinson, Alex wrote:
> Hi all,
>
> >From the _client_ perspective can anyone recommend any tools/techniques to
> >debug
> Cisco VPN client problems
Your basis of radius attributes will most likely be :
Framed-Protocol:= PPP
Framed-MTU := 1500
Framed-IP-Address := 192.168.1.100
Framed-IP-Netmask := 255.255.255.255
Service-Type := Framed-User
And the required Cisco-AVPair attribute.
and yo