Re: [c-nsp] Event Manager Script

Hi Try with 120 seconds delay. Also use environment variable to depicting to get email whensoever event triggers. Ami On Wednesday, March 5, 2014 10:01 AM, Oliver Boehmer (oboehmer) oboeh...@cisco.com wrote: can you just remove the action 2.0 reload from the script for the test so the

[c-nsp] EEM for BGP

Hi list, Is that possible to write an Embedded Event Management System to achive the following in following scenario of BGP environment?   There are very many BGP peerings in the network, and many events. The reason may be that customers turn off the power at the CPE, etc. We believe that it

[c-nsp] QinQ

Hi list I am new to QinQ. Any idea about QinQ basic configuration for testing CDP, Spanning, MTU etc which r connected to different switches.   Ami ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

[c-nsp] copy config

Hi list Is there any command/ command syntax to copy running configuration of one interface e.g interface serial1/0 onto another Interface e.g interface serial1/3. In switching we have an option of HSRP VRRP etc. Any help ?? ___ cisco-nsp mailing

[c-nsp] SPLUNK

Hi list Anyone having idea about SPLUNK? I am new to it. Regards, Ami ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

[c-nsp] Switchport trunk allowed issues

Hi I am writing a EEM using Cisco ios cli, can anyone have valuable suggestion  about how to materialize it. Following is the topic Using following command on switch i.e    switchport trunk allowed vlan add/remove/all/except/none range However, if one forgets to include the

[c-nsp] EEM applet for Vlan for switches

Hi In routers for writing EEM applet through Cisco IOS Cli we normally use following command event manager applet (name) trap   Does anyone has idea or suggestion that which command is used on Switches to write EEM applet through Cisco IOS Cli as the above mentioned command is not working on